Analog Fire Alarm Central Control Panel - R Type
Characteristics:
- LCD panel in English (LCD Specification:240X128)
- 17" color touch LCD panel (optional) with various functions for clients to choose from
a. (Touch) Control panel of fire-fighting equipment at the disaster prevention center
b. Graphic fire monitoring & control system
c. Fire control touch panel (riser diagram)
- Two-wire transmission
- Super-long transmission distance (a maximum of 2 km between the central control unit and the repeater)
- Optional functions of the central control unit
a. A maximum of 2048 addressable points for addressable devices
b. Serial reporting interface: a maximum of 2048 points
c. R-type synchronized auxiliary: connect to a maximum of 16 auxiliary units
d. Possible to interconnect 8 R-type central control units to form a large fire monitoring & prevention network
e. One RS-232 communication port and three RS-485 communication ports to connect with the central computer monitoring system
- Memory device for permanent information storage of a maximum of 2048 entries (possibly up to 10.000 entries)
- Protection for system communication modules
- Detection of communication wire insulation damage
- Protection against lightening surge
- Protection against repeater wiring connectionless
- Staged isolation for repeaters
- Repeater Condition Table
- Protection against leakage for addressable devices
- Editing software configuration for addressable devices
- Automatic weekly testing
- Two-phase-accumulation false reporting prevention
- Backup power saving function
- LCD back light saving function
- Sound-plus-voice guidance system when system functions are in use.
- A built-in printer.
- Control panel of fire-fighting equipments at the disaster prevention center (optional)
Specification:
1. Model No: HAFN-90 series
2. Main Power Supply: AC 110V 50-60Hz/ AC 220V 50-60Hz
3. Stand-by Battery: Sealed Maintenance Lead-Acid Battery (DC 24V/4Ah - DC 24V/7Ah)
4. Transmission Distance: Two wire Type (divided into subordinate distributing wires) 2Km
5. Circuit Voltage: Local Audio/Fire Alarm Confirm Line/Indicator/Local Phone: DC 24V; Communication Power Supply: AC 32V
6. Power Consumption: Main Control Panel Monitoring (Max): 500mA; Communication Board (per system) Monitoring (Max): 280mA
7. Transmission: Selection/Polling
8. Reporting Output: Contact Output: Serial Transfer x 13 pieces, up to 2.048 points (In accordance with contact needs, 40 points (standard), up to 160 points)
9. Main Audio: Sound-Plus-Voice, Human Voice or Alarm Sound (above 90dB).
10. Temperature Range: 0 ~ 40oC
11. Main Material: Steel Plate of 1,5mm
12. Exterior Processing: Powder Coating
13. Dimension:
Wall-mount: HAFN-9001 -> HAFN-9011 (150L - 256L): H580mm x W480mm x D180mm
HAFN-9012 -> HAFN-9014 (512L - 1024L): H800mm x W560mm x D200mm
Floor-Standing: HAFN-9015 -> HAFN-9016 (1280L - 1536L): H1500mm x W560mm x D260mm
HAFN-9017 (1792L): H1800mm x W560mm x D260mm
HAFN-9018 (2048L): H1800mm x W560mm x D360mm
Product of Hanagashi
- LCD panel in English (LCD Specification:240X128)
- 17" color touch LCD panel (optional) with various functions for clients to choose from
a. (Touch) Control panel of fire-fighting equipment at the disaster prevention center
b. Graphic fire monitoring & control system
c. Fire control touch panel (riser diagram)
- Two-wire transmission
- Super-long transmission distance (a maximum of 2 km between the central control unit and the repeater)
- Optional functions of the central control unit
a. A maximum of 2048 addressable points for addressable devices
b. Serial reporting interface: a maximum of 2048 points
c. R-type synchronized auxiliary: connect to a maximum of 16 auxiliary units
d. Possible to interconnect 8 R-type central control units to form a large fire monitoring & prevention network
e. One RS-232 communication port and three RS-485 communication ports to connect with the central computer monitoring system
- Memory device for permanent information storage of a maximum of 2048 entries (possibly up to 10.000 entries)
- Protection for system communication modules
- Detection of communication wire insulation damage
- Protection against lightening surge
- Protection against repeater wiring connectionless
- Staged isolation for repeaters
- Repeater Condition Table
- Protection against leakage for addressable devices
- Editing software configuration for addressable devices
- Automatic weekly testing
- Two-phase-accumulation false reporting prevention
- Backup power saving function
- LCD back light saving function
- Sound-plus-voice guidance system when system functions are in use.
- A built-in printer.
- Control panel of fire-fighting equipments at the disaster prevention center (optional)
Specification:
1. Model No: HAFN-90 series
2. Main Power Supply: AC 110V 50-60Hz/ AC 220V 50-60Hz
3. Stand-by Battery: Sealed Maintenance Lead-Acid Battery (DC 24V/4Ah - DC 24V/7Ah)
4. Transmission Distance: Two wire Type (divided into subordinate distributing wires) 2Km
5. Circuit Voltage: Local Audio/Fire Alarm Confirm Line/Indicator/Local Phone: DC 24V; Communication Power Supply: AC 32V
6. Power Consumption: Main Control Panel Monitoring (Max): 500mA; Communication Board (per system) Monitoring (Max): 280mA
7. Transmission: Selection/Polling
8. Reporting Output: Contact Output: Serial Transfer x 13 pieces, up to 2.048 points (In accordance with contact needs, 40 points (standard), up to 160 points)
9. Main Audio: Sound-Plus-Voice, Human Voice or Alarm Sound (above 90dB).
10. Temperature Range: 0 ~ 40oC
11. Main Material: Steel Plate of 1,5mm
12. Exterior Processing: Powder Coating
13. Dimension:
Wall-mount: HAFN-9001 -> HAFN-9011 (150L - 256L): H580mm x W480mm x D180mm
HAFN-9012 -> HAFN-9014 (512L - 1024L): H800mm x W560mm x D200mm
Floor-Standing: HAFN-9015 -> HAFN-9016 (1280L - 1536L): H1500mm x W560mm x D260mm
HAFN-9017 (1792L): H1800mm x W560mm x D260mm
HAFN-9018 (2048L): H1800mm x W560mm x D360mm
Product of Hanagashi
Analog Fire Alarm Central Control Panel - P Type
Characteristic:
- English LCD Display: The operation panel and LCD display are designed in English with character guidance interface clearly indicating the situation on-the-spot.
- LCD Touch Screen: LCD touch screen and the function are available for optional.
- Automatically Test Weekly: The system has automatic test function at pre-set time and user can set by the circle of a week to test each circuit automatically. (As fire alarm activated during testing, the testing will be stopped automatically)
- Accumulation Function: Accumulation function is to prevention for false-alarm, and this function can be switch off from the control panel. Each circuit has a 2-stage accumulation function. Through the Central Control Unit Software, the accumulation function can also be deactivated for individual circuit.
- 2 Circuit LED's 4 Color Display 5 Different Situations: Each circuit light panel module has 8 circuit indication lights. Each circuits is equipped with 2 LED's with 4 colors indicating 5 different situation, able to clearly display any situation of the circuits.
- 2-wire transfer function: The addressable module to control panel is connect by 2-wire transfer mode.
- Voice guidance: The system includes guidance speech-sounds during malfunction mode and normal mode, which gives the management personnel a clear understanding of the malfunction location and guides the operators through the operational procedures.
- Real-time print function printer: This printer can print the circuit activate and print any signal received from the sensor.
- Communication Error Monitoring Screen: The Central Control Unit has a communication error monitoring screen, which can directly monitor the communication status of the circuit light panel display module and I/O control communication module.
- Addressable module external function: The communication module connect to I/O module, addressable detector, each addressable I/O module and detectors can show on the control panel's LCD be Encoding address for each addressable device.
Specification:
- Model: HAFN - 90 Series R Type
- Power Supply: AC 110V / AC 220V 50-60Hz
- Type: Wall-mounted/Floor Standing
- Category: Digital P-Type Center Control Panel
- Stand-by Battery: DC 24V Sealed Maintenance-free Lead-acid Battery
- Voltage Alarm: Low-voltage detection alerts
- Charger Voltage and Current: DC 26,4V, 100mA-500mA, Trickle Charger
- Circuit Voltage and Current: DC 24V, short circuit voltage 5V, below 32mA
- External Circuit Impedance: To-and-fro below 50 Ohm, ground impedance above 2MOhm
- Detectors: Number of differential and constant-temperature detectors unlimited; for smoke detectors (DC 24V 80mA) or digital differential detectors, a maximum of 28 smoke detectors can be connected for each circuit.
- Terminal Device: 10kOhm/Capacitor
- Number of Indicators: Panel circuits * 1,2
- Number of Bell: Panel circuits * 1,2
- Material: 1,2mm ! 2,00mm Standard Steel
- Main Audio: Buzzer style speaker (85dB for distance of over 1 meter)
- Remote Signal Contact: No Voltage normally open contact, capacity AC 250V 3A
- Accessories: Fuse X6, terminal resistors X circuit number, local telephone handset X2, operational manual X1.
Dimension:
1. Type: Wall-mounted
- Circuit 8L - 16L: H 570mm x W 510mm x D 200mm
- Circuit 17L - 32L: H 700mm x W 510mm x D 200mm
- Circuit 33L - 48L: H 825mm x W 510mm x D 200mm
- Circuit 49L - 64L: H 995mm x W 580mm x D 200mm
- Circuit 65L - 80L: H 1120mm x W 580mm x D 260mm
2. Type: Floor-Standing
- Circuit 81L - 112L: H 1500mm x W 580mm x D 260mm
- Circuit 113L - 160L: H 1800mm x W 580mm x D 260mm
- Circuit 161L - 256L: H 1800mm x W 1160mm x D 260mm (2-in-1)
Product of Hanagashi
- English LCD Display: The operation panel and LCD display are designed in English with character guidance interface clearly indicating the situation on-the-spot.
- LCD Touch Screen: LCD touch screen and the function are available for optional.
- Automatically Test Weekly: The system has automatic test function at pre-set time and user can set by the circle of a week to test each circuit automatically. (As fire alarm activated during testing, the testing will be stopped automatically)
- Accumulation Function: Accumulation function is to prevention for false-alarm, and this function can be switch off from the control panel. Each circuit has a 2-stage accumulation function. Through the Central Control Unit Software, the accumulation function can also be deactivated for individual circuit.
- 2 Circuit LED's 4 Color Display 5 Different Situations: Each circuit light panel module has 8 circuit indication lights. Each circuits is equipped with 2 LED's with 4 colors indicating 5 different situation, able to clearly display any situation of the circuits.
- 2-wire transfer function: The addressable module to control panel is connect by 2-wire transfer mode.
- Voice guidance: The system includes guidance speech-sounds during malfunction mode and normal mode, which gives the management personnel a clear understanding of the malfunction location and guides the operators through the operational procedures.
- Real-time print function printer: This printer can print the circuit activate and print any signal received from the sensor.
- Communication Error Monitoring Screen: The Central Control Unit has a communication error monitoring screen, which can directly monitor the communication status of the circuit light panel display module and I/O control communication module.
- Addressable module external function: The communication module connect to I/O module, addressable detector, each addressable I/O module and detectors can show on the control panel's LCD be Encoding address for each addressable device.
Specification:
- Model: HAFN - 90 Series R Type
- Power Supply: AC 110V / AC 220V 50-60Hz
- Type: Wall-mounted/Floor Standing
- Category: Digital P-Type Center Control Panel
- Stand-by Battery: DC 24V Sealed Maintenance-free Lead-acid Battery
- Voltage Alarm: Low-voltage detection alerts
- Charger Voltage and Current: DC 26,4V, 100mA-500mA, Trickle Charger
- Circuit Voltage and Current: DC 24V, short circuit voltage 5V, below 32mA
- External Circuit Impedance: To-and-fro below 50 Ohm, ground impedance above 2MOhm
- Detectors: Number of differential and constant-temperature detectors unlimited; for smoke detectors (DC 24V 80mA) or digital differential detectors, a maximum of 28 smoke detectors can be connected for each circuit.
- Terminal Device: 10kOhm/Capacitor
- Number of Indicators: Panel circuits * 1,2
- Number of Bell: Panel circuits * 1,2
- Material: 1,2mm ! 2,00mm Standard Steel
- Main Audio: Buzzer style speaker (85dB for distance of over 1 meter)
- Remote Signal Contact: No Voltage normally open contact, capacity AC 250V 3A
- Accessories: Fuse X6, terminal resistors X circuit number, local telephone handset X2, operational manual X1.
Dimension:
1. Type: Wall-mounted
- Circuit 8L - 16L: H 570mm x W 510mm x D 200mm
- Circuit 17L - 32L: H 700mm x W 510mm x D 200mm
- Circuit 33L - 48L: H 825mm x W 510mm x D 200mm
- Circuit 49L - 64L: H 995mm x W 580mm x D 200mm
- Circuit 65L - 80L: H 1120mm x W 580mm x D 260mm
2. Type: Floor-Standing
- Circuit 81L - 112L: H 1500mm x W 580mm x D 260mm
- Circuit 113L - 160L: H 1800mm x W 580mm x D 260mm
- Circuit 161L - 256L: H 1800mm x W 1160mm x D 260mm (2-in-1)
Product of Hanagashi
Monitor Control Input Module. Model: MHA-IMM
Functions:
- Circuit Input Contacts/ Detector/Manual Call/Flow Indicator.
- EOL Resistor: Below 10 Ω / master line
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitored Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Note: Addressable EOL termination embedded
Feature:
- On-board indicators for the status of "Monitoring," "Active," and "Error."
- Address coding by binary coded dip switch for easier setting.
- Two-wires multi-transmission.
- Stable communication with rejection to noise and disturbances.
- On-board self-test functions for circuit disconnection and activation.
- Expandable to connect with photoelectric smoke, rate of rise heat and fixed temperature heat detectors.
- On-board no voltage control output, activation confirmation function.
- Communication isolation function, when short circuit occurring in the module, it will be automatically isolated from the main communication line.
- Light indication pattern ( fire: red light constantly on, disconnection: red light flashing, monitoring: red light flashing once per 2.5s).
- Alumina rail lock structure, easy to install.
Product of Hanagashi
- Circuit Input Contacts/ Detector/Manual Call/Flow Indicator.
- EOL Resistor: Below 10 Ω / master line
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitored Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Note: Addressable EOL termination embedded
Feature:
- On-board indicators for the status of "Monitoring," "Active," and "Error."
- Address coding by binary coded dip switch for easier setting.
- Two-wires multi-transmission.
- Stable communication with rejection to noise and disturbances.
- On-board self-test functions for circuit disconnection and activation.
- Expandable to connect with photoelectric smoke, rate of rise heat and fixed temperature heat detectors.
- On-board no voltage control output, activation confirmation function.
- Communication isolation function, when short circuit occurring in the module, it will be automatically isolated from the main communication line.
- Light indication pattern ( fire: red light constantly on, disconnection: red light flashing, monitoring: red light flashing once per 2.5s).
- Alumina rail lock structure, easy to install.
Product of Hanagashi
Monitor Control Output Module. Model: MHA-OMM
Functions:
- Circuit Output/ Bell/Elevator/Control Panel/ ...
- EOL Resistor: Below 10 Ω / master line
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitored Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Note: Addressable EOL termination embedded
Characteristics:
- On-board indicators for the status of “Monitoring,” Activate,” and “Error.”
- Address coding by binary coded dip switch for easier setting.
- Two-wires multi-transmission.
- Stable communication with rejection to noise and disturbances.
-On-board self-test functions for circuit disconnection and activation.
- Expandable to connect with photoelectric smoke, rate of rise heat and fixed temperature heat detectors.
- On-board voltage control output, activation confirmation function.
- Communication isolation function, when short circuit occurring in the module, it will be automatically isolated from the main communication line.
- Output 24VDC can directly connect with all kinds of systems.
- Light indication pattern (fire: red light constantly on, disconnection: red light flashing, monitoring: red light flashing once per 2.5s).
- Alumina rail lock structure, easy to install.
Product of Hanagashi
- Circuit Output/ Bell/Elevator/Control Panel/ ...
- EOL Resistor: Below 10 Ω / master line
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitored Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Note: Addressable EOL termination embedded
Characteristics:
- On-board indicators for the status of “Monitoring,” Activate,” and “Error.”
- Address coding by binary coded dip switch for easier setting.
- Two-wires multi-transmission.
- Stable communication with rejection to noise and disturbances.
-On-board self-test functions for circuit disconnection and activation.
- Expandable to connect with photoelectric smoke, rate of rise heat and fixed temperature heat detectors.
- On-board voltage control output, activation confirmation function.
- Communication isolation function, when short circuit occurring in the module, it will be automatically isolated from the main communication line.
- Output 24VDC can directly connect with all kinds of systems.
- Light indication pattern (fire: red light constantly on, disconnection: red light flashing, monitoring: red light flashing once per 2.5s).
- Alumina rail lock structure, easy to install.
Product of Hanagashi
Addressable Rate of rise Heat Detector. Model: HAN-RRD
Technical Specification:
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fireproof Plastic
- Dimension: 108x43mm
Feature:
- Address coding by dip switch
- Two-wires multi-transmission
- It's available to connect with general detectors.
- It responds immediately when the temperature rises rapidly.
- High-quality parts are used to ensure the functional reliability.
- The detector is made of flameproof and high temperature-resistant plastic with elegance design.
Product of Hanagashi
- Ambient Temperature: -10℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 420A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fireproof Plastic
- Dimension: 108x43mm
Feature:
- Address coding by dip switch
- Two-wires multi-transmission
- It's available to connect with general detectors.
- It responds immediately when the temperature rises rapidly.
- High-quality parts are used to ensure the functional reliability.
- The detector is made of flameproof and high temperature-resistant plastic with elegance design.
Product of Hanagashi
Addressable Fixed Temperature Heat Detector. Model: HAN-FHD
Technical Specification:
- Communication Resistance: below 10Ohm/master line
- Ambient Temperature: 0℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 450A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Dimension: 108x46mm
Feature:
- Address coding by dip switch
- Two-wires multi-transmission
- With the function of photoelectric sensor, it can act rapidly and accurately with high stability. Also, it won’t caused false alarms by chemistry substance, gas leakage or external light.
- Steel insect-proof nets with the hole size of 0.5 mm ensure smooth inflow of smoke and prevent insects or dust entering into the detector
- The detector doesn’t contain any radioactive substances, and no harm to humans or animals.
- The detector is reusable and easy maintenance. Remove the cover to clean the interior.
- The detector is made of flameproof and high temperature-resistant plastic.
Product of Hanagashi
- Communication Resistance: below 10Ohm/master line
- Ambient Temperature: 0℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 450A/DC24V
- Operating Voltage: DC16V~30V
- Material: Fire-proof plastic
- Dimension: 108x46mm
Feature:
- Address coding by dip switch
- Two-wires multi-transmission
- With the function of photoelectric sensor, it can act rapidly and accurately with high stability. Also, it won’t caused false alarms by chemistry substance, gas leakage or external light.
- Steel insect-proof nets with the hole size of 0.5 mm ensure smooth inflow of smoke and prevent insects or dust entering into the detector
- The detector doesn’t contain any radioactive substances, and no harm to humans or animals.
- The detector is reusable and easy maintenance. Remove the cover to clean the interior.
- The detector is made of flameproof and high temperature-resistant plastic.
Product of Hanagashi
Addressable Photoelectric Smoke Detector. Model: HAN-PSD
Technical Specification:
- Ambient Temperature: 0℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 450A/DC24V
- Operating Voltage: DC16V~30V
Characteristic:
- Address coding by dip switch
- Two-wires multi-transmission
- With the function of photoelectric sensor, it can act rapidly and accurately with high stability. Also, it won’t caused false alarms by chemistry substance, gas leakage or external light.
- Steel insect-proof nets with the hole size of 0.5 mm ensure smooth inflow of smoke and prevent insects or dust entering into the detector
- The detector doesn’t contain any radioactive substances, and no harm to humans or animals.
- The detector is reusable and easy maintenance. Remove the cover to clean the interior.
- The detector is made of flameproof and high temperature-resistant plastic.
- Ambient Temperature: 0℃ ~ 50℃
- Relative Humidity: below 95 %
- Monitoring Current: 450A/DC24V
- Operating Voltage: DC16V~30V
Characteristic:
- Address coding by dip switch
- Two-wires multi-transmission
- With the function of photoelectric sensor, it can act rapidly and accurately with high stability. Also, it won’t caused false alarms by chemistry substance, gas leakage or external light.
- Steel insect-proof nets with the hole size of 0.5 mm ensure smooth inflow of smoke and prevent insects or dust entering into the detector
- The detector doesn’t contain any radioactive substances, and no harm to humans or animals.
- The detector is reusable and easy maintenance. Remove the cover to clean the interior.
- The detector is made of flameproof and high temperature-resistant plastic.